{"product_id":"828rc-redcat-ascent-apex-rear-cantilever-suspension-conversion-kit-with-injora-shocks","title":"828RC Redcat Ascent Apex Rear Cantilever Suspension Conversion Kit with INJORA Shocks","description":"\u003cp\u003e\u003cstrong\u003eCOMPLETE REAR SUSPENSION CONVERSION - INJORA OIL SHOCKS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring the compact bellcrank-operated cantilever suspension of the 828RC King Snake system to your \u003cstrong\u003eRedcat Ascent Apex.\u003c\/strong\u003e This complete rear cantilever conversion includes the same shock assemblies, connecting rods, bearings, and hardware components as our King Snake kit, with Apex-specific adjustable mounting rails, revised bellcrank linkage fitment, and the correct Apex mounting bolts.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedcat Ascent Apex-specific rear cantilever suspension geometry\u003c\/li\u003e\n\u003cli\u003eTwo included INJORA 45 mm FCX24 oil shocks\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting positions for suspension setup and ride-height tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable connecting rods and redesigned Apex-specific bellcranks\u003c\/li\u003e\n\u003cli\u003eCompact shock layout with bellcrank-operated rear suspension\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware and bearings included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComplete Kit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 Apex-specific adjustable rear mounting rails \/ brackets\u003c\/li\u003e\n\u003cli\u003e2 Apex-specific bellcranks\u003c\/li\u003e\n\u003cli\u003e2 INJORA 45 mm FCX24 oil shocks\u003c\/li\u003e\n\u003cli\u003e4 bellcrank bearings (2 per bellcrank)\u003c\/li\u003e\n\u003cli\u003e4 rod ends with pivot balls\u003c\/li\u003e\n\u003cli\u003e2 M2.5 × 15 mm grub screws for the adjustable connecting rods\u003c\/li\u003e\n\u003cli\u003eAssorted M2 and M2.5 hardware for the Apex installation, including the fasteners shown in the guide below\u003c\/li\u003e\n\u003cli\u003eBellcrank pivot spacers \/ washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApex Installation — Bolt Sizes \u0026amp; Locations\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock to mounting rail:\u003c\/strong\u003e M2 × 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting rail to chassis:\u003c\/strong\u003e M2 × 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock to bellcrank:\u003c\/strong\u003e M2 × 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBellcrank pivot to rail mount:\u003c\/strong\u003e M2.5 × 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable rod link to bellcrank:\u003c\/strong\u003e M2 × 8\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Hardware is installed on both sides where applicable. Install the included spacer \/ washer \u003cstrong\u003ebehind the bellcrank, between the bellcrank and the mounting rail\u003c\/strong\u003e. \u003cstrong\u003ePLEASE PRETHREAD BOLTS PRIOR TO INSTALLATION.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"margin: 24px 0; text-align: center;\"\u003e\n\u003cp\u003e\u003cstrong\u003e828RC APEX CANTILEVER HARDWARE SIZES \u0026amp; LOCATIONS — INSTALLATION GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0928\/6742\/8670\/files\/828RC-Apex-Cantilever-Hardware-Locations.png?v=1794596616\" rel=\"noopener noreferrer\" style=\"display: block;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0928\/6742\/8670\/files\/828RC-Apex-Cantilever-Hardware-Locations.png?v=1794596616\" alt=\"828RC Redcat Apex rear cantilever installation guide with numbered bolt locations, M2 and M2.5 sizes, spacer placement and prethreading reminder\" style=\"display: block; width: 100%; max-width: 1100px; height: auto; margin: 12px auto;\" loading=\"lazy\"\u003e\u003c\/a\u003e\n\u003cp style=\"font-size: 0.9em;\"\u003eClick image to open full-size installation guide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the \u003cstrong\u003eRedcat Ascent Apex\u003c\/strong\u003e. This is the Apex-specific version; the 828RC \/ DBRC King Snake TRX-4M kit uses different mounting geometry and hardware. Confirm clearance and suspension travel during installation.\u003c\/p\u003e\n\u003ch3\u003e3D Printed Parts Disclaimer\u003c\/h3\u003e\n\u003cp\u003ePrinted components are manufactured in-house by 828RC and may show minor layer lines or surface marks. Avoid excessive heat, prolonged direct sunlight, and over-tightening bolts in printed parts.\u003c\/p\u003e\n\u003ch3\u003eMade to Order\u003c\/h3\u003e\n\u003cp\u003eTypical processing time is \u003cstrong\u003e2–3 business days\u003c\/strong\u003e, but may take \u003cstrong\u003eup to 2 weeks\u003c\/strong\u003e depending on workload and order volume.\u003c\/p\u003e","brand":"828RC and Collectibles","offers":[{"title":"Orange\/Gold","offer_id":54930408243518,"sku":null,"price":34.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":54930408276286,"sku":null,"price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/6742\/8670\/files\/20261111_015301.jpg?v=1794613792","url":"https:\/\/828rc.com\/products\/828rc-redcat-ascent-apex-rear-cantilever-suspension-conversion-kit-with-injora-shocks","provider":"828RC and Collectibles ","version":"1.0","type":"link"}