828RC Redcat Ascent Apex Complete Squarebody Cab & Bed Kit

The complete 828RC Squarebody transformation for the Redcat Ascent Apex! This kit combines the popular pinched C10-style Squarebody Cab with a matching pickup bed, detailed lenses, the V2 snip-to-fit front tube bumper, and two ways to mount the rear bed.

What's Included

• 828RC Pinched Squarebody Cab
• Matching Squarebody pickup bed
• Detailed front grille and front headlight lenses
• 828RC V2 snip-to-fit front tube bumper
• Rear taillight lenses
• Custom magnetic chassis rail mount
• Four N52 12 × 2 mm magnets
• Cab-to-bed mounting adapter
• Two mounting standoffs
• M2 × 4 bolts and required mounting hardware

Two Mounting Options

Option 1 – Retain factory receiver tray: Reuse the Redcat Ascent Apex stock horizontal cab mounting pins/receiver tray. The included magnet mount bolts between the chassis rails and secures the bed; bed pressure holds the 828RC cab in place. No receiver relocation required.

Option 2 – Bolt cab and bed together: Insert the included adapter through the bed into the cab and fasten with the two standoffs and supplied M2 × 4 bolts. This configuration requires removing the stock receiver tray/horizontal cab mounting pins and relocating the receiver as with the optional factory bed.

Cab & Fitment Notes

The cab is designed for the Redcat Ascent Apex factory front body hooks. The included V2 front tube bumper can be trimmed to suit the builder's tire size, wheel offset and preferred fit. Reuse factory mounting components where applicable and take care not to force tight-fit mounting clips.

Color & Material

Choose from basic Grey, standard 828RC printed colors, or a premium material option when available. Printed colors and finishes can vary between filament batches. Limited-edition and specialty materials are subject to availability.

Body kit only. Complete vehicle, chassis, wheels, tires, receiver, and electronics are not included.

Turnaround Time

All 828RC printed parts are made to order. Typical turnaround is 2–3 business days but can take up to 2 weeks depending on workload and order volume.

3D Printed Parts & Photo Disclaimer

Parts are 3D printed in-house and may show minor layer lines, support marks, or surface imperfections. Some light cleanup or sanding may be required. Avoid excessive force and over-tightening during installation. Do not leave printed parts in direct sunlight, a hot vehicle, or other confined high-heat spaces where warping or deformation may occur.

Photos may depict prototype or pre-production parts. Production colors, finishes, and minor details may vary.

Optional Woodgrain Bed Decal: Finish your Squarebody build with our precision die-cut, drop-in woodgrain bed-floor decal, available in five finishes. Shop the 828RC Apex Wood Bed Decal here. Sold separately.

Display Finish & Weathering Disclaimer

PLEASE NOTE: Product photos show a custom-finished display build with paint, simulated weathering, and decorative detailing. Painting, weathering, and the woodgrain bed-floor decal shown are not included with the standard printed bed or complete body kit. Kits are supplied in the selected printed filament color/material and may be painted or customized by the buyer. Other display accessories and vehicle components pictured are not included unless specifically listed under “What's Included.”