828RC Redcat Ascent Apex Squarebody Bed Add-On Kit

***THIS LISTING IS FOR THE APEX SQUAREBODY BED ONLY***

Complete your 828RC Apex Squarebody build with a matching pickup bed! Designed to pair with the 828RC Pinched Squarebody Cab for the Redcat Ascent Apex, this bed add-on includes both a magnetic chassis mount and the optional hardware to mechanically attach the bed to the cab.

What's Included

• 828RC Squarebody pickup bed
• Custom magnetic chassis mount that bolts between the chassis rails
• Four N52 12 × 2 mm magnets
• Cab-to-bed mounting adapter
• Two mounting standoffs
• M2 × 4 bolts and required mounting hardware
• Rear taillight lenses

Two Mounting Options

Option 1 – Magnetic mounting, retain the stock receiver tray: Keep the stock horizontal cab mounting pins/receiver tray. The included chassis-rail magnetic mount secures the bed. With the bed installed, the 828RC cab is held in position by the pressure of the mounted bed. No receiver relocation is required.

Option 2 – Mechanically attach cab and bed: Insert the supplied adapter through the bed into the cab, install the two supplied standoffs, and secure with the included M2 × 4 bolts. This method requires removing the stock receiver tray/horizontal cab mounting pins and relocating the receiver, as with the stock optional bed setup.

Color Options & Limited Edition Matching

Select Grey, Red, White, Yellow, Orange, or Carolina Blue, or choose OTHER / LE COLORS if you previously purchased an 828RC Apex Squarebody Cab in a limited-edition color or specialty material and need a matching bed.

IMPORTANT – OTHER / LE COLORS: After selecting this option, you must contact 828RC by email with your original cab order number, the exact color/material requested, and your new bed order number. This option is intended for matching previously purchased LE cabs, not requesting an arbitrary new custom color. LE filaments are subject to material availability; contact 828RC before ordering if uncertain. Specialty material pricing may require confirmation.

Color Matching Disclaimer

PLEASE NOTE: An exact match to your original cab cannot be guaranteed, including for standard colors. Filament supply and batch variation, manufacturer differences, age, sun exposure, and other factors can cause differences in color or finish. By purchasing this bed add-on, you acknowledge that minor color and finish variations may occur.

Compatibility

Designed for the Redcat Ascent Apex and 828RC Pinched Squarebody Cab. Bed and mounting components only; cab, chassis, wheels, tires, and electronics are not included.

Turnaround Time

All 828RC printed parts are made to order. Typical turnaround is 2–3 business days but can take up to 2 weeks depending on workload and order volume.

3D Printed Parts & Photo Disclaimer

Parts are 3D printed in-house and may show minor layer lines, support marks, or surface imperfections. Some light cleanup or sanding may be required. Avoid excessive force and over-tightening during installation. Do not leave printed parts in direct sunlight, a hot vehicle, or other confined high-heat spaces where warping or deformation may occur.

Photos may depict prototype or pre-production parts. Production colors, finishes, and minor details may vary.

Optional Woodgrain Bed Decal: Finish your Squarebody build with our precision die-cut, drop-in woodgrain bed-floor decal, available in five finishes. Shop the 828RC Apex Wood Bed Decal here. Sold separately.

Display Finish & Weathering Disclaimer

PLEASE NOTE: Product photos show a custom-finished display build with paint, simulated weathering, and decorative detailing. Painting, weathering, and the woodgrain bed-floor decal shown are not included with the standard printed bed or complete body kit. Kits are supplied in the selected printed filament color/material and may be painted or customized by the buyer. Other display accessories and vehicle components pictured are not included unless specifically listed under “What's Included.”