828RC K30 Dually Body and WT Micro Chassis combo for the SCX-24
Chassis By WT_Micro
Original Body file by Andrey Bezrodny
**ONLY 20 WILL BE MADE. ONCE THEY'RE GONE, THEY'RE GONE FOR GOOD.**
Bodies will be numbered XX of 20 and COMPLETELY RANDOM. I will not be doing special number requests and WILL NOT print any extras after these are sold.
Bed Includes provisions for the optional Functional 5th Wheel HERE, and optional Bed Mounted Transfer Tank HERE
Body Includes:
- 1 Cab
- 1 Bed
- 1 Detail Printed Silver Grille
- Front and Rear Bumpers
- 1 Lens set
Chassis Includes:
- 2 Chassis Rails
- 2 Sliders
- 1 Skid
- 1 Front Shock Mount/Crossmember
- 1 Rear Shock Mount/Crossmember
- 1 Front Body Mag Mount
- 1 Hitch
- 2 Axle Spring Mounts
- 2 12x3 Bolt on Front Magnets with bolts
- 2 12x3 Standard Front Magnets (Glue on to Body)
- 4 8x3 Rear Body Mount Magnets
Required Parts for assembly (not included)
C-Bolt Links (C10 Front and Deadbolt Rear)
2nd Transmission (SCX24) *See Pictures
C10 Front Driveshafts (Front and Center)
Deadbolt Rear Driveshaft (Rear)
Injora 39mm oil shocks minimum
Hardware kit: M2 bolts for body and accessories and M1.4 bolts for chassis (3mm chassis rails require longer hardware than stock)
Rear wire servo is highly recommended, direct mount ear-less is even better.
Check out @24yeps video assembling the chassis HERE
LEAD TIME DISCLAIMER:
This is a large, made-to-order 3D-printed body. Due to extended print times and post-processing, typical lead time is 5–7 business days, but may take up to 1–2 weeks depending on workload and print queue. Please be patient. These are printed slower for more detail and rigidity.
3D-Printed Parts Disclaimer
All 3D-printed parts are produced in-house using high-quality materials. Due to the nature of 3D printing, minor surface imperfections such as layer lines, small support marks, or light stringing may be present. Some parts may require light sanding or cleanup. Certain items may ship with support material left in place to prevent damage during transit and can be easily removed.
3D-printed parts are designed to be durable and functional, but they are not indestructible. Please install and use with care.
